Heavy Metals in Baby Food: How They Enter Crops and How BARI Manages Them

Ingredient quality and safety naturally vary by region over time, because our environment is constantly changing. That is why meaningful food safety depends on ongoing & evolving verification processes. 

3 minute read

What to Know

  • Lead, arsenic, cadmium, and mercury can occur naturally in the environment or come from human activity like industrial waste spillate and use of chemical pesticides. 
  • Crops can take up some contaminants from soil and water, but levels vary with the environment, crop, and growing method.
  • Because one result is only a snapshot, BARI tests every production batch and connects parents with results associated with their product.

Heavy metals can appear in food because food begins from nature. Soil, water, and air may contain lead, arsenic, cadmium, or mercury from natural geology or human activity. Crops can take up some of these substances, and concentrations may change with location, soil, irrigation water, crop variety, and farming conditions.[1][2] One historical result therefore cannot represent every future batch. Consistent monitoring matters.

Detection does not automatically mean a food will cause harm. Risk depends on the substance, concentration, frequency and duration of exposure, and the person eating it.[3][4][5][6] The goal is informed exposure management, not fear.

Why Are Heavy Metals Found in Food at All?

These substances may occur in the earth’s crust, while mining, manufacturing, fuel combustion, older agricultural practices, and other pollution can raise environmental levels.[1] “Heavy metals” is a convenient food-safety shorthand, but the four are not identical. Arsenic is technically a metalloid, and its chemical form matters.[4][7]

Where Lead, Arsenic, Cadmium, and Mercury Come From

Lead may come from natural deposits and legacy uses in gasoline, paint, plumbing, and industry.[3] Arsenic occurs in some rocks and soils, while past pesticide use, mining, and industrial pollution can add to environmental levels.[4] Cadmium can reflect local geology, phosphate fertilizer use, smelting, mining, or fossil-fuel combustion.[5]

Mercury can enter the environment through volcanic activity and weathering, as well as fuel combustion, manufacturing, and gold mining. Unlike the other examples, the most common U.S. dietary exposure to mercury is methylmercury in seafood, not crops.[6]

How Contaminants Can Enter Crops

Roots absorb water and nutrients, and some substances dissolved in soil water may move into plant tissues. Airborne pollutants can also settle on plants.[2] Uptake depends on the element, crop, and environment.

Why Levels Can Vary, Including in Rice

Environmental levels differ by geography and nearby pollution. Uptake also varies by crop, variety, soil chemistry, irrigation, and water management.[7]

Let’s talk about rice as an example. It tends to absorb arsenic more readily than other crops due to how it is grown, yet the FDA affirms that rice can remain part of a balanced diet.[8] Arsenic levels can vary with location, production method, cultivar, soil, and water.[7] This supports thoughtful sourcing and consistent monitoring.

So… natural variation is exactly why consistent testing matters.

Why This Matters More for Baby Food

Babies eat more food relative to body weight than adults, have smaller bodies, and are still developing. Repeating a smaller set of familiar foods can concentrate exposure from one source.[9] That makes monitoring especially meaningful for early-life foods.

Why One Test Is Not Enough

A test describes the sample measured at that time. When ingredients vary by harvest, field conditions, or lot, an older result cannot verify every later product.

USDA Organic verifies approved production and handling methods.[10] It does not establish that environmental elements are absent. Organic certification and contaminant testing answer different questions.

How BARI Manages Heavy Metals

According to BARI’s verified testing practices, every production batch is tested for lead, arsenic, cadmium, and mercury as part of the product-release process. Testing is repeated rather than treated as an occasional spot check or replaced by one historical result.

Safety is not assumed. It is checked batch by batch.

From Testing to Transparency

Parents can scan their BARI product’s barcode to access the heavy metal test results associated with that product. A report cannot promise zero risk or answer every safety question, but it makes this layer of verification visible and traceable.

Practical Takeaways for Parents

Heavy metals are an environmental food-safety issue to monitor thoughtfully, not a reason to fear nourishing foods.

  • Remember that detection and risk are not the same. Concentration and exposure pattern matter.
  • Look for ongoing testing and traceable results, not only broad front-of-package language.
  • Continue offering rice and other valued foods within a varied, age-appropriate diet.
  • Ask your pediatrician if you have concerns about a child’s exposure, diet, or a specific test result.

Follow BARI at @ricebari_official on Instagram and TikTok for feeding ideas, new flavors, and updates from our kitchen.

BARI is available on Amazon, Weee!, and select independent retailers.

Explore All BARI Products →

Sources

[1] U.S. Food and Drug Administration. “Environmental Contaminants in Food.” Updated April 29, 2026. Accessed September 9, 2026.

[2] U.S. Environmental Protection Agency. “Exposure Assessment Tools by Media: Food.” n.d. Accessed September 9, 2026.

[3] U.S. Food and Drug Administration. “Lead in Food and Foodwares.” Updated January 6, 2025. Accessed September 9, 2026.

[4] U.S. Food and Drug Administration. “Arsenic in Food.” Updated March 5, 2024. Accessed September 9, 2026.

[5] U.S. Food and Drug Administration. “Cadmium in Food and Foodwares.” Updated March 5, 2024. Accessed September 9, 2026.

[6] U.S. Food and Drug Administration. “Mercury in Food.” n.d. Accessed September 9, 2026.

[7] Leavitt, Marguerita E., Michele L. Reba, Angelia L. Seyfferth, and Benjamin R. K. Runkle. “Agronomic Solutions to Decrease Arsenic Concentrations in Rice.” Environmental Geochemistry and Health, May 16, 2025. Accessed September 9, 2026.

[8] U.S. Food and Drug Administration. “What You Can Do to Limit Exposure to Arsenic.” Updated April 27, 2022. Accessed September 9, 2026.

[9] U.S. Environmental Protection Agency. “Children’s Unique Vulnerabilities to Environmental Hazards.” n.d. Accessed September 9, 2026.

[10] U.S. Department of Agriculture, Agricultural Marketing Service. “Organic.” n.d. Accessed September 9, 2026.

Back to the blog title
0 comments
Post comment
Note: comments needs to be approved before publication

Cart

loading